chocomoo 发表于 2013-1-21 17:53

大西米 发表于 2013-1-21 18:39 static/image/common/back.gif
是你的Vaneo?我的小A是在近13万公里的时候把前轴的碟刹换掉的,之前也是这个声音。你极其轻柔的多次轻 ...

是Vaneo,我今天试了几次轻柔刹车,然后的确声音就小了,但是大力刹还是有老鼠叫!
等我问问我那个修车的朋友看

leibniz 发表于 2013-1-21 18:03

这贴也是基本一月来一次

shadowboy 发表于 2013-1-21 18:04

chocomoo 发表于 2013-1-21 17:53 static/image/common/back.gif
是Vaneo,我今天试了几次轻柔刹车,然后的确声音就小了,但是大力刹还是有老鼠叫!
等我问问我那个修车的 ...

买一管ATE Plastilube

chocomoo 发表于 2013-1-21 18:36

忘记说了:刹车片去年4月还是5月做TUEV换过的

armstrong95123 发表于 2013-1-21 20:01

shadowboy 发表于 2013-1-21 17:30
你上次换刹车皮的修车厂偷工减料了,没给你上点润滑的pasta

锈了

pyws060606 发表于 2013-1-21 20:20

我的也是,放了一个月,就刹车有声音,刹几次就好了,没有问题。

guokuo 发表于 2013-1-21 20:26

chocomoo 发表于 2013-1-21 17:26 static/image/common/back.gif
搭车问一下刹车“吱吱。。。吱”的像老鼠叫的声音,是啥原因啊?

我猜会不会是break judder?一般的刹车都会有吧。wiki了一下。见如下(文字来源于维基百科)
Brake judder is usually perceived by the driver as minor to severe vibrations transferred through the chassis during braking.
The judder phenomenon can be classified into two distinct subgroups: hot (or thermal), or cold judder.
Hot judder is usually produced as a result of longer, more moderate braking from high speed where the vehicle does not come to a complete stop. It commonly occurs when a motorist decelerates from speeds of around 120 km/h (74.6 MPH) to about 60 km/h (37.3 MPH), which results in severe vibrations being transmitted to the driver. These vibrations are the result of uneven thermal distributions, or hot spots. Hot spots are classified as concentrated thermal regions that alternate between both sides of a disc that distort it in such a way that produces a sinusoidal waviness around its edges. Once the brake pads (friction material/brake lining) comes in contact with the sinusoidal surface during braking, severe vibrations are induced, and can produce hazardous conditions for the person driving the vehicle.
Cold judder, on the other hand, is the result of uneven disc wear patterns or disc thickness variation (DTV). These variations in the disc surface are usually the result of extensive vehicle road usage. DTV is usually attributed to the following causes: waviness and roughness of disc surface, misalignment of axis (runout), elastic deflection, wear and friction material transfers.

chocomoo 发表于 2013-1-21 20:31

armstrong95123 发表于 2013-1-21 21:01 static/image/common/back.gif
锈了

我天天开,不会锈吧?最近天冷都是停车库的

fusion 发表于 2013-1-21 20:37

chocomoo 发表于 2013-1-21 20:31 static/image/common/back.gif
我天天开,不会锈吧?最近天冷都是停车库的

你这不是锈,是可能有小石子什么粘着了吧,不用管,我有一段时间也有声,刹车片也很新,还去4S店看了

jnlz 发表于 2013-1-21 20:39

本帖最后由 jnlz 于 2013-1-21 20:56 编辑

shadowboy 发表于 2013-1-21 18:04 static/image/common/back.gif
买一管ATE Plastilube

这东西喷什么位置,real有没有卖, 在atu换了刹车皮后 也有声音 最近刹车盘中间位置还出现一条痕 以为刹车皮夹了铁末 不知是不是质量问题 去atu拆下来用布擦了,边角喷了一点什么蓝什么剂,装回去最近刚开始杀又来老鼠吱,后面基本听不到了,天天开车,是什么名堂呢   
页: 1 [2] 3
查看完整版本: 关于Audi刹车有异响问题求教